|
A lot of belt porosity is lost from build up on the backs of the belts.
Date: 06/10/2002
Views: 460
|
Water alone is not always enough to keep the polymer and grease build-up off of the filter media.
Date: 06/10/2002
Views: 403
|
A one hour evalation by a qualified Schaner's representative can assist you in diagnosing your machine.
Date: 06/10/2002
Views: 362
|
The smallest of build-ups will cost you hours of production and impact your sludge quality.
Date: 06/10/2002
Views: 386
|
A polygone demonstration is simply this pump hooked up to your wash water line.
Date: 06/10/2002
Views: 383
|
|
Ordinarily, your filter cloths can look this much better in a short period of time with Polygone!
Date: 06/10/2002
Views: 389
|
The following series of photos are representative of the shortcomings of operations in the USA!
Date: 06/10/2002
Views: 374
|
Striping of sludge and polymer is obvious.
Date: 06/14/2002
Views: 379
|
The spray systems are not enough for this operation!
Date: 06/14/2002
Views: 324
|
Too much polymer is being used to get the job done!
Date: 06/14/2002
Views: 406
|
